Brand New Massey Ferguson Tractors

Checking and Changing the Steering Oil and Filter

MF-350/260 Mechanical steering has been installed in this tractor, in which to check oil in the steering box, remove the plug located on the steering box. Make sure the oil is completely filled with oil. Replenish if the oil level is low and tighten the plug back on.

Place to check / refill oil in the steering assembly

MF-385/375/385 4WD  Power steering has been installed in this tractor. To check the oil in this unit, remove the oil reservoir plug located next to the steering pump at front of the engine. If the oil trickles slowly out of the hole, place the plug back in and tighten. Replenish if the oil level is low.

Place to check / refill oil in the steering pump MF 375/385/385 4WD

How to Remove Power Steering Oil Remove the bolts located behind the steering box, remove the filter etc and drain the oil. How to Replenish Oil Remove the plug on the reservoir. Start the engine. Straighten the front wheels and then turn the steering clockwise one complete circle. Turn off the engine and replenish oil. Oil Capacity The steering pump reservoir in MF385/385 4WD can hold up to 2 liters of oil. Change the power steering oil with the filter after every 250 hours.
How to change power steering filter MF-385/385 4WD